Category Archives: Woodworking

This was a special project for special someone. The frame is solid walnut. The shelf surface is 1/2” walnut plywood with solid walnut sides.

Here are the two handtool cabinet boxes I was working on. Now I can put plane accessories etc. away. The fronts are from maple burl, the drawer parts are walnut. Half blind dovetails for the fronts, through dovetails for the … Continue reading →

Back at ‘er. Another small #handtool cabinet box. It’s been a while since I’ve done dovetails but even with the time gone by it’s the tightest and quickest yet. #woodworking #walnut

It’s not perfect but the second picture with the microbevel is sharper than it was before. Here is something I’ve wanted to do for a while, take a close up picture of a plane blade edge before and after.

Here is a small turned walnut textured box I made from a Lee Valley course taught by Steven Kennard from Nova Scotia.

I saw this spider in my backyard while pulling weeds and thought I’d take a couple pictures using my Canon 100mm macro lens.

I made a better support bracket for my Festool Domino XL 700. This one bolts onto the base and is larger than the one that came with the kit and also has clamping elements to allow you to slide a … Continue reading →

I needed to trim many bolts to an odd length. This is how I did it using a scrap of wood, drill and a jig saw.

Not too bad!